Electrical
500', Red 10 Solid Building Wire, Type THHN, Nylon Jacketed, Thermoplastic, 90 Degrees Celsius, Copper, 600V.
500', Green 10 Solid Building Wire, Type THHN, Nylon Jacketed, Thermoplastic, 90 Degrees Celsius, Copper, 600V.
500' Green 6 Stranded Building Wire, Type THHN, Nylon Jacketed Thermoplastic, 90 Degrees Celsius, 600V.
125', 6/2 Non-Metallic With Ground Sheathed Cable, Copper, 90 Degrees Celsius, Coil.
3/8" Knockout, 2-Screw Clamp Connector, 90 Degree Angle, For Armored Cable & Flexible Metal Conduit, Die Cast Zinc, Used To Terminate Either Type AC Armored Cable Or Flexible Metal Conduit To A Knockout In A Dry Location Box Or Enclosure, UL & CSA Approved, UPC Poly Bag.
Push Button Switch, Single Pole Single Throw Normally Off, Momentary Contact, Screw Terminal, Recommended Mounting Hole Fits 1/2" Diameter, 6A/125V, Black, Carded.
Heavy Duty Toggle Switch, Double Pole Double Throw, On/Off/On, Screw Terminals, Recommended Mounting Hole Fits 1/2" Diameter, 20A/125V, 1-1/2 HP, Carded.
1/2", 2 Screw, 90 Degree Angle, Clamp Connector, For Armored Cable & Flexible Metal Conduit, Die Cast Zinc, Used To Terminate Either Type AC Armored Cable Or Flexible Metal Conduit To A Knockout In A Dry Location Box Or Enclosure, UL & CSA Approved, UPC Poly Bag.
1" Beam Clamp, Malleable Iron, Used To Clamp On A Beam, Girder Or Other Structural Member To Provide A Mounting Base For The Attachment Of Conduit Hangers, Either Directly Or By Means Of Threaded Rod, CSA Approved.
2 Pack, 1-1/4" x 1", Zinc Plated Steel, Reducing Washer, For Use with Rigid/IMC Conduit, Used To Reduce The Size Of A Knockout On Sheet Metal Box, Enclosure Or Cabinet, Secured By A Pair Of Locknuts For Each Knockout, UL & CSA Approved, UPC Polybag.
1/2" Electrical Metallic Tubing Set Screw Type Connector, 90 Degree Angle, Rain Tight & Concrete Tight, Die Cast Zinc, Used To Terminate Electrical Metallic Tubing To An Unthreaded Knockout With A Right Angle Approach In Damp Locations, UL & CSA Approved, UPC Poly Bag.
35 Pack #1, Anti Short Bushing, BX-Flex, Used To Insert The Open End Of Armored Cable Or Flexible Metal Conduit To Protect Conductors From Sharp Edges, (AS1PL).
1-1/2" Clamp Type Connector, Twin Screw, Die Cast Zinc, Used To Terminate Type SE Cable Or Type NN Cable To A Box Or Enclosure, UL & CSA Approved.
2 Pack, 1" x 1/2", Zinc Plated Steel, Reducing Washer, For Use With Rigid/IMC Conduit, UPC Polybag.